AHS-500 Electric Steam Iron with 2.5m Heated Warm Hose

AHS-500 Electric Steam Iron with 2.5 m Heated Warm Hose

Delivery: About 60-75 days after receipt of your order confirmation.

Looking for an electric steam iron for garment pressing with a heated hose? The AHS-500 pairs an electric steam iron with a 2.5 m warm hose that has an electric heater built into it. The heated hose is designed to keep the steam path warm during use; actual results depend on the connected steam supply and operating conditions. It is a practical option to consider for garment pressing and sewing-workroom finishing where reach around the pressing station matters.

What makes it distinctive?

• Heated warm hose: The electric heater is built into the 2.5 m hose, rather than relying on an unheated steam line.
• Pressing-station reach: The 2.5 m hose gives room to position the iron around a suitable work area.
• Clear electrical specification: 220V, single-phase (1PH), 840W. Confirm that your electrical supply and steam connection are suitable before purchase.

Three possible issues to watch for

1. Iron not heating: If the soleplate stays cool, the power supply, cord, controls or internal heating components may need checking by a qualified technician.
2. Hose not warming: If the warm hose remains cold, its heater, wiring or connection may need inspection. Stop using it if the hose or cable is damaged.
3. Weak steam or water droplets: Check the connected steam supply, hose routing and fittings; condensation or a restriction may contribute. Have leaks or persistent problems assessed before further use.

Care and maintenance

Before each use, visually check the iron, plug, cable, hose and fittings for damage, leaks or sharp bends. Confirm connections are secure and follow the instructions for your steam supply. After use, switch off, disconnect power, allow the iron and hose to cool completely, then wipe the exterior with a soft cloth. Do not immerse electrical parts or open the iron or heated hose.

Suggested inspection schedule: Make a visual check before every shift or use. Once a month, inspect the hose route, fittings, cable and plug more closely. Arrange a qualified electrical and steam-system inspection at least annually, or more often for intensive use and as required by the manufacturer or workplace rules. These are general recommendations, not a manufacturer-prescribed service interval.

Spare parts and replacement planning

There is no verified fixed replacement interval for the AHS-500 heated hose or iron components. Replace a damaged, leaking or non-heating part based on inspection and qualified diagnosis, not simply by age. For a busy pressing operation, keeping one compatible heated warm hose as a standby spare may reduce downtime, provided its exact fit and electrical rating are confirmed. For lighter use, order a replacement only when required. Confirm AHS-500 spare-part compatibility before purchase.

Specifications

• Model: AHS-500
• Product: Electric steam iron with heated warm hose
• Electrical rating: 220V, 1PH, 840W
• Warm hose length: 2.5 m
• Hose heater: Built in

Before ordering: Confirm compatibility with your steam source, hose fittings and electrical supply. Steam generator or boiler inclusion is not specified.

Model AHS-500:
220V, 1PH, 840W.
Electric Steam Iron, Electric Heater is built-in the Warm Hose (2.5m).