Naomoto FB-700SN Balanced Performance Vacuum Ironing Table – 1200 × 700mm

1. Application, Functionality & Specialty

The Naomoto FB-700SN is designed as a professional vacuum-only ironing table for garment finishing and pressing applications. Its vacuum system helps hold fabric against the ironing surface during pressing, supporting consistent garment handling and finishing.

• High-Performance 4-Pole Motor: Equipped with a high-performance, low-noise 4-pole motor for vacuum operation.
• Powerful Vacuum Function: The vacuum system helps draw fabric securely toward the ironing surface during pressing and finishing operations.
• Universal Buck F-1720N with Swing Arm: The supplied F-1720N Universal Buck provides a shaped working area for garment sections that are difficult to press effectively on a completely flat surface.
• Modular Buck Configuration: The table is designed around a replaceable buck arrangement, allowing compatible buck configurations to be considered for different garment-finishing requirements.
• Industrial Working Format: The 1200 × 700mm table surface provides a practical working area for commercial garment production, alteration, laundry and textile-finishing environments.

2. Five Common Maintenance & Failure Considerations

Like other industrial vacuum ironing tables, regular cleaning and inspection can help maintain vacuum performance and reduce avoidable downtime. The following are common maintenance considerations for this type of equipment.

• Vacuum Performance Reduction from Lint: Fabric fibres, lint and dust can accumulate around air passages, filters or internal components. Excessive buildup may reduce airflow and vacuum performance.
• Buck Gasket or Seal Wear: Repeated buck installation and removal can eventually cause seals or gaskets to wear, compress or become damaged, potentially resulting in air leakage.
• Foot Pedal or Mechanical Linkage Wear: Dust accumulation or mechanical wear around moving components may affect smooth pedal operation. Inspect the mechanism if the pedal becomes stiff or does not return properly.
• Motor Capacitor or Electrical Component Failure: Electrical components such as motor capacitors can deteriorate over time. Symptoms may include difficulty starting the motor, abnormal motor behaviour or failure to operate.
• Height Adjustment Mechanism Wear: Repeated adjustment of the working height can eventually cause wear to locking pins, bolts or other adjustment components. Inspect these components periodically for secure operation.

3. Recommended Maintenance Procedure & Schedule

Maintenance frequency should be adjusted according to operating hours, working environment, fabric type and the manufacturer's service recommendations.

• Daily: Clean the primary ironing and vacuum surface. Remove visible lint, fibres and debris before or after operation.
• Daily: Check that the installed F-1720N buck and its connection are secure and that there are no obvious signs of air leakage.
• Weekly: Inspect accessible under-table air passages and vacuum-related areas for lint or other obstructions. Clean where required.
• Monthly: Inspect buck seals and gaskets for cracking, flattening, deterioration or other visible damage.
• Quarterly: Inspect moving components of the height-adjustment mechanism and foot-pedal assembly. Lubrication should only be carried out where specified by the manufacturer's service instructions.
• Periodic Professional Inspection: Have the motor, electrical connections, vacuum system and mechanical components inspected by a qualified technician when unusual noise, reduced suction or operating faults occur.

4. Recommended Spare Parts & Replacement Considerations

Spare-part requirements depend on operating conditions and usage intensity. Rather than replacing components on a fixed schedule without inspection, replacement should be based on condition, performance and the applicable Naomoto service recommendations.

• Interchangeable Buck Gaskets / O-Rings: Consider keeping compatible spare seals available, particularly where bucks are changed frequently. Replace damaged or deteriorated seals when air leakage is identified.
• Main Table Cover Cloth: Inspect regularly for excessive wear, contamination, thinning or loss of suitable pressing characteristics. Replace when the cover no longer provides the required working condition.
• Motor Start Capacitor: Keep a compatible replacement available where the equipment operates continuously and downtime must be minimised. Replacement should be carried out when testing confirms capacitor deterioration or when recommended by a qualified technician.
• Buck and Vacuum Seals: Inspect sealing surfaces whenever the buck is exchanged or when vacuum performance appears reduced.

5. Naomoto FB-700SN Technical Specifications

6. FBZ-SE vs FB-700SN vs FB-130SN

The three Naomoto table configurations serve different pressing requirements. The main differences are the air function, table size and buck configuration.

7. Which Naomoto Table Configuration Fits the Application?

• FBZ-SE: Suitable where both blowing and vacuum functions and multiple buck configurations are required.
• FB-700SN: Suitable for applications requiring a vacuum ironing table with the F-1720N Universal Buck and Swing Arm.
• FB-130SN: Suitable where a larger 1200 × 900mm unobstructed flatbed vacuum surface is preferred and a buck is not required.

8. Why Consider the Naomoto FB-700SN?

• Industrial vacuum ironing table configuration.
• 1200 × 700mm working surface.
• 400W vacuum motor system.
• 220V / 1Ph / 50Hz electrical specification.
• High-performance, low-noise 4-pole motor.
• Supplied with F-1720N Universal Buck and Swing Arm.
• Adjustable working height.
• Optional exhaust chimney configuration.
• Suitable for professional garment and textile-finishing applications.