Turret Only, for Lockstitch Machines, Hongkong Supply, Part Number: 154628-001
When sewing multiple processes with only one unit, there is no need to replace the presser foot. Simply rotate it and select the required presser foot.
No tools—such as a screwdriver—are required to replace or adjust the presser foot. This allows the operator to prepare the desired presser foot easily and safely.
When attached to the DDL-9000CF (premium digital), the machine instantly switches to the appropriate sewing pattern (needle thread tension, presser foot pressure, feed dog height, feed locus, etc.) that matches the type and process of the presser foot, thereby reducing sewing adjustment time.
-
Turret Presser Foot Assembly for Lockstitch or 3-Position Presser Foot Holder Assembly:
The primary difference between these two Juki Turret Presser Foot attachments is their machine compatibility, specifically designed for different sub-models within the DDL-9000C series. Both are 3-position holder assemblies that allow an operator to switch between three different presser feet by simply rotating the turret.
Key Differences & Compatibility
-
Part No. 40257811:
-
Main Model: Specifically for the DDL-9000C-F (Premium Digital type).
-
Functionality: When attached to the Premium Digital model, it allows the machine to instantly switch between sewing patterns (such as thread tension and presser foot pressure) that match the specific process of the selected foot.
-
Part No. MAS07300AA0:
-
Main Models: Primarily for the DDL-9000C-S (Digital type).
-
Broad Compatibility including the DDL-8000A, DDL-8700-7, and DDL-900C.
Summary Table
Part No. 40257811: 3-position presser foot holder ; DDL-9000C-F (Premium Digital). Full Pattern Switching Support.
Part No. MAS07300AA: 3-position presser foot holderDDL-9000C-S (Digital); DDL-8000A, 8700-7, 900C, etc. Standard Digital Support.
Important Installation Notes
-
No Feet Included: Neither assembly includes actual presser feet; the holder must be populated with your chosen feet separately.
-
Bar Height Adjustment: Installing these turrets requires you to manually adjust the height of the presser foot bar upward—typically by about 14mm to 15mm—to accommodate the turret mechanism.
📄 Download our PDF Catalogue 
